Ham It Up: HF Upconverter For RTL-SDR RTL2832U R820T2; HackRF RF Up Converter US

Description

Welcome to NooElec @ eBay!
eBay Store
Coupons
Return Policy
Shipping Policy
Payment Policy
Product Details
Manufacturer
Nooelec
Model
Ham It Up v1.3
NooElec SKU
100555
Quantity
1pc Ham It Up (Assembled)
Technical Details
Applications
HF reception, software defined radio
Product Information
Now shipping v1.3!  We believe this is the best SDR HF upconverter available. Here is why.
Recent revisions
Proudly
designed, fabricated and assembled in the USA and Canada!
Input, output and LO filters reconfigured for
substantial sensitivity and selectivity improvements
New ultra low-noise linear power regulator (LP5907), with
voltage noise under 10 µVRMS
!
Optional battery-powered operation
for DXing on the go!  (easy-to-assemble AAA battery holder sold separately, or roll-your-own solution with the easily-accessible battery power input vias)
New
side-mount LED indicators
, easily visible with or without an enclosure (Green = upconvert mode enabled; Yellow = USB powered; Red = low voltage).  Enclosure sold separately
Fully-assembled broadband RF noise source
built-in (Note: SMA output jack excluded to comply with government regulations, but can be purchased separately).  The noise source can be used in conjunction with your SDR to test and calibrate all sorts of RF devices
u.FL socket (also known as IPX and UMCC) available for
optional clock injection from an external clock source
, should a higher-accuracy clock be desired
5 other u.FL socket mounting footprints for
simplified testing, troubleshooting and demonstration purposes
Additional mounting holes to facilitate custom installations
Sturdy right-angle SMA connectors
to improve spacing tolerances and ensure physical compatibility with our machined aluminum enclosures (enclosures sold separately)
Redesigned for a
surface-mount oscillator
to eliminate potential oscillator-desocketing issues
Features
Multiple power options
, including USB-B, external power, and AAA batteries (requires battery pack add-on, available separately)
Upconverter
enable/passthrough toggle switch
--less fiddling with small, delicate cables and connectors.  Flick the switch and listen to VHF/UHF again!
Female SMA connectors
for both input and output, for a wide array of connectivity options
In-line SMA connectors
.  Much easier to connect and manipulate than side-by-side SMA connectors
Antenna protection
on RF input--in-circuit in both enable and passthrough mode--to protect your Ham It Up & SDR from stray ESD
Only
ultra-low-noise components
used in the signal path
Ultra-high-Q, low ESR inductors and capacitors
used for all filters
All critical components sourced exclusively from North American parts distributors
RF-suitable power supply regulation
(LP5907)
PTC fuse
on USB power input to protect your Ham It Up upconverter from short circuits
125MHz oscillator for
improved sensitivity
(away from high-traffic RF zones, like broadcast FM)
Stable <25ppm
oscillator included
LO disabled in passthrough mode
A maximum input level of +1dBm with LO at +7dBm
High-quality 2-layer PCB
with ENIG finish
Small, light-weight
PCB (just 3.8" x 1.9")
Designed to fit standard off-the-shelf Hammond enclosures
7 mounting holes
for standard PC screws
Designed and manufacturered in conjunction with Opendous Inc., an excellent open-hardware design company
Full project documentation--schematics, PCB design files, assembly information--is freely available.
A portion of the proceeds from your purchase will be used to support this and other open-hardware, open-source initiatives
BONUS!
We had space left on the PCB, so rather than waste it we have added a noise source circuit at no additional cost! We have even populated most of the components for you. We have the SMA connector required to complete this bonus noise source circuit available for a small additional fee. Details of the noise source circuit are available with the project documentation.
Operation
Before operating your unit for the first time, and every time you run with a new SDR, we recommend running the tuning procedure located here. It is not a mandatory procedure but may help fine-tune your, erm. tuning. The basic operational instructions follow.
Connect your HF-suitable antenna to the RF input
Connect your SDR to the IF output with an appropriate adapter or cable
Ensure your toggle switch is in the enable position
Plug your USB power source into the USB-B USB jack
Fire up your favorite SDR software.  Tune to 125MHz + your desired frequency and enjoy!
About us
Why purchase from NooElec?  Because we know software defined radio, and know it well.  We support our products.  We warranty our products.  Perhaps most importantly, we understand our products.  We are always glad to help customers who have technical questions.